Finishing A Pocket Floor In Titanium
Machining animation from Boeing illustrates effective techniques for titanium workpieces. This simulation also shows finishing of the floor of the pocket.
Share
Like the previous simulation in this series, this machining simulation provided by Boeing Research and Technology (using CGTech software) shows roughing followed by material removal from the corners prior to finishing. The finishing of the walls is performed with fast passes at successive layers.
This simulation also shows finishing of the floor of the pocket. Note how the tool radiates out from the center of the pocket to the wall. This keeps unmachined stock always adjacent to the cut for support. No section of the floor is ever touched again after it has been machined once.
Find details in the articles at right. Or, see other videos in this series:
1. Video: Finishing Walls In Titanium
2. Video: Finishing A Pocket Floor In Titanium
3. Video: Plunge-And-Sweep For Finishing Corners
Ìý
Related Content
-
How to Mitigate Chatter to Boost Machining Rates
There are usually better solutions to chatter than just reducing the feed rate. Through vibration analysis, the chatter problem can be solved, enabling much higher metal removal rates, better quality and longer tool life.
-
Indexable Drill Heads Double Profitability
Moving to a robust line of indexable drills enabled this shop to dramatically alter the manufacturing process for a problem part, doubling its profitability.
-
Measuring Torque, Thrust Force for Smart Drilling Operations
To monitor drilling operations for smart manufacturing solutions, torque and thrust force can be measured.