-
SPONSORED
-
SPONSORED
-
Tooling
Latest Tooling Articles
VIEW ALL
Schwanog Insertable Tooling System Eliminates Presetting
Eastec 2025: Schwanog’s insertable tooling systems can eliminate the need to preset the tool due to tool changeovers being accomplished directly in the machine.
Read More
Platinum Tooling Shrink-Fit Technology Enables Flexible Tooling Connections
Eastec 2025: Platinum Tooling distributes Rineck shrink-fit tooling and shrink-fit machine technology, including standard and custom shrink-fit toolholders with various connections, including CAT, HSK, BT, SK, PSC and straight shank extensions.
Read More
Haimer Tool Presetting Machine Optimizes Setup Processes
Eastec 2025: The VIO Linear 20|70 offers reliable, repeatable measurements of tool length and diameter due to its robust linear guide design, high-resolution camera optics and user-friendly touchscreen interface.
Read More
Mate Custom Machinable Hard Jaws Handle Complex Geometries
Eastec 2025: Mate Precision Technologies’ machinable hard jaws can handle complex geometries typically associated with soft jaws but with increased rigidity and hardness.
Read More
Tungaloy Grooving Tools Enhance Machining Stability
The TetraForceCut and TetraMiniCut series are designed to provide greater productivity across external grooving, parting-off, face grooving, threading and custom profiling applications.
Read More
Sumitomo Turning Grades Increase Tool Life for Machining Titanium Alloys
Eastec 2025: The AC9115T and AC9125T turning grades feature Sumitomo’s Absotech coating technology and tungsten carbide-based composition, which suppresses chemical reactions with titanium alloys and increases wear resistance.
Read MoreLatest Workholding Articles
View more Workholding content
Workholding Fixtures Save Over 4,500 Hours of Labor Annually
All World Machinery Supply designs each fixture to minimize the number of operations, resulting in reduced handling and idle spindle time.
Watch
Lean Approach to Automated Machine Tending Delivers Quicker Paths to Success
Almost any shop can automate at least some of its production, even in low-volume, high-mix applications. The key to getting started is finding the simplest solutions that fit your requirements. It helps to work with an automation partner that understands your needs.
Watch
Dillon's Extruded Aluminum Pie Jaws Maximize Contact Area
Eastec 2023: The company’s full-grip pie jaws are machined from aluminum barstock, meaning they have none of the porosity inherent with castings.
Watch
Dillon's Full-Grip Chuck Jaws Reduce Part Distortion
Dillon Full-Grip Jaws are ideal for high-speed machining, as well as precision boring, tapping, drilling and finishing across most industrial markets.
Watch
IMTS Takeaways From the ¸ßÅâÂÊÁùºÏ²Ê Editorial Team
The first in-person IMTS in four years left the ¸ßÅâÂÊÁùºÏ²Ê editorial staff with a lot to digest. Here are a few of our takeaways from the show floor.
Watch
Moving To Magnets Doubles Productivity
Moving from hydraulic to magnetic fixtures enabled this shop to reduce setup time, improve rigidity and eliminate manual operations. As a result, productivity doubled.
WatchLatest Cutting Tools Articles
View more Cutting Tools content
Heule Deburring Tool Designed for Micromachining in a Wide Range of Materials
The DL2 deburring tool is designed to provide high efficiency and process reliability on even and slightly uneven bore edges.
Watch
Heule Cutting Tool Provides Chatter-Free Countersinks
PMTS 2025: GH-K tooling is well suited for conventional milling of chamfers around the perimeter of larger holes or entire parts.
Watch
Quick-Change Tool Heads Reduce Setup on Swiss-Type Turning Centers
This new quick-change tooling system enables shops to get more production from their Swiss turning centers through reduced tool setup time and matches the performance of a solid tool.
Watch
Monaghan Reaming System Provides Long Service Life
The Diatool Top Speed Ring modular reaming system features multiblade design with uneven spacing of cutting edges to create round and cylindrical bores.
Watch
How to Mitigate Chatter to Boost Machining Rates
There are usually better solutions to chatter than just reducing the feed rate. Through vibration analysis, the chatter problem can be solved, enabling much higher metal removal rates, better quality and longer tool life.
Watch
Toolpath Improves Chip Management for Swiss-Type Lathes
This simple change to a Swiss-type turning machine’s toolpath can dramatically improve its ability to manage chips.
WatchLatest Toolholders Articles
View more Toolholders content
Platinum Toolholding System Enables Quick Changeovers
The U-Tec changing system enables a standard ER output live tool to accept various adapters for different applications, enabling quick changeover of tools on almost any lathe or mill using a single tool.
Watch
Five Common Mistakes Shops Make with ER Collets (And How to Prevent Them)
Collets play a crucial role in the machining process, so proper tool assembly and maintenance is important. Here are five potential pitfalls to avoid when using ER collets.
Watch
Kaiser Manufacturing's Tool Caddy Safely Stores Cutting Tools
The Tool Caddy makes it convenient for the operator to grab toolholders without any risk of cuts.
Watch
How to Manage Cutting Tool Inventory in a Small Job Shop — The One-Person Shop #4
Working in short lead times means maintaining a large range of tools to be ready. What is the right way to stock and organize this investment?
Watch
The Knob Problem
The retention knob is an unmistakably critical component of the machining process. However, the tightening of the knob itself can lead to the toolholder not seating securely in the machine. You may be losing tool life to knob tightness without even knowing it.
WatchLatest Tooling News And Updates
Kaiser Threading Inserts Cut in Wide Range of Applications
The Thinbit Mini Groove ‘N Turn Acme threading inserts can be used to cut centralizing or stub profiles by overcutting. They can be used for internal Acme threads on parts with bore diameters of 0.325" and larger.
Read More
SMW Connection Kit Enables Fast Power-to-Manual Chuck Conversion
The Manual Jack connection kit is compatible with stationary milling machines, five-axis machines and mill-turn machines, making it well suited for multipallet systems that require versatility and efficiency.
Read More
Emuge-Franken Taps Feature Universal Threading Geometry
The MultiTap NPT/NPTF pipe taps feature a specialized, shortened projection length when compared to traditional ANSI standard taper taps, decreasing cycle time and increasing tool life.
Read More
Walter Milling Cutters Provide High-Quality Surface Finishes
Eastec 2025: The MP270, MP271 and MP470 milling tools are designed to reduce cutting forces and minimize machining vibrations due to their optimized geometries.
Read More
Sandvik Coromant Drill System Optimizes Performance
Sandvik Coromant’s CoroDrill DE10 eliminates the need for a pilot hole to guide the drill into place, enabling both tool inventory and cycle times to be significantly reduced in short-hole drilling.
Read More
Scientific Cutting Tools' Custom, Modified Tooling Boosts Efficiency
PMTS 2025: Scientific Cutting Tools provides customized solutions that address specific geometries, coatings and material requirements.
Read MoreFeatured Posts
Picking the Right End Mill
Kennametal global product manager Katie Myers explains how cutting tool features can impact machining strategies for different materials.
Read More
Inside the Process of Cutting Tool Recycling
Global Tungsten & Powders, part of the Ceratizit Group, sheds light on the processing steps that convert a shop’s used inserts into new tools and other applications.
Read More
Indexable Drill Heads Double Profitability
Moving to a robust line of indexable drills enabled this shop to dramatically alter the manufacturing process for a problem part, doubling its profitability.
Read More
Measuring Torque, Thrust Force for Smart Drilling Operations
To monitor drilling operations for smart manufacturing solutions, torque and thrust force can be measured.
Read More
PowRgrip Responds to Three Tooling Trends
Rego-Fix’s PowRgrip tooling system has expanded over the past 20 years to incorporate a wider range of tool sizes, as well as automation.
Read More
Advanced CAMs Simplify Programming of Conical Barrel Cutters
Conical barrel cutters have grown in popularity thanks to the large stepovers that reduce the time needed for some finishing processes, but advanced CAM systems can dramatically improve their usefulness.
Read More