Manufacturer Turns Inward for New Machine

Economics 9 May 2025

After Brief Expansion, Metalworking Index Fell to 46 in April
Shop Management Software 8 May 2025

Get with the Program(ming): 10 Articles to Help You Transform Your Data
Inspection and Measurement 7 May 2025

Common Methods for Measuring Workpiece Radii
Shop Management Software 6 May 2025

Shop Tour Video: Inside an Aviation & Defense Machine Shop
Measurement 5 May 2025

How To (Better) Make a Micrometer
Basics 2 May 2025

Chatter and Feed Rate Scheduling
SPONSORED 1 May 2025

Automation is for Everyone
SPONSORED 1 May 2025

The Smarter Way to Take Full Control of Your CNC Machine Shop
Data-Driven Manufacturing 30 Apr 2025

The Shift Toward Smarter Shops: Real-World Stories of Data-Driven Manufacturing
28 Apr 2025

How I Made It: Mark and Nancy Rohlfs

Published 10/18/2011

Manufacturer Turns Inward for New Machine

The Hardinge Workholding Group needed a heavy-duty machine with a rigid structural design that could perform multiple operations. After scouring the market, the group found the right model closer to home than it expected.

Edited by: 高赔率六合彩 Editorial Team

The machine’s 12-position turret is kept loaded with enough tooling to machine the majority of parts processed on the cell without the need for change-overs.

By using M-codes, programmers can control the torque limit for synchronous part transfer from the main spindle to the sub-spindle.

When the Hardinge Workholding Group needed a new turning center to complete the setup of a lean manufacturing cell, it didn’t have to go far. In fact, the machine it needed was being built at another Hardinge facility. The GS 200 MSY offered all the features the company considered most important: fast X- and Z-axis rapid traverse rates, high torque, a subspindle with C-axis indexing capability and sufficient rigidity and repeatability.

The machine’s brand is just a bonus, says Tom Mitchell, general manager of the Elmira, New York-based company’s Workholding Group. “Of course we try to use a Hardinge machine, but we will purchase the best machine to fit our application, no matter what brand,” he explains. He cites the following factors as setting the machine apart from other models in the same class:

• Subspindle and turret design—The GS 200 MSY is part of a cell dedicated to a family of components that begin as carburized steel slugs measuring 2.5 inches long and 4 inches in diameter. Equipped with main and subspindles, the turning center can machine both ends of these workpieces in one setup. This eliminates the need for two lathes. Meanwhile, C-axis indexing capability and turret-mounted live tools enable additional operations that might otherwise require another machine. The result is less operator intervention for loading and unloading as well as reduced floor-space requirements, cost per part and manufacturing overhead, Mr. Mitchell says.

Cell operator Britt Brewster adds that each of the turret’s 12 positions accommodates holders wide enough to grip two separate static or live tools, one for main-spindle operations and one for subspindle operations. Additionally, clearance from the back of the turret to the subspindle head wall is sufficient to enable the use of longer drills and boring bars, eliminating typical subspindle machining restraints. Together, these features reduce change-overs by enabling the company to keep the turret stocked with dedicated tooling that covers the majority of parts processed on the machine, he says.

• Traverse speed and torque—The machine’s X- and Z-axis rapid traverse rates of 1,181 ipm are 25 to 49 percent faster than those of other models the company considered, Mr. Mitchell says. Likewise, the main spindle’s dual-wound motor provides 235 foot-pounds of torque, which is said to be more than twice as much as the other models. This is critical for heavy metal removal during turning and drilling operations, he notes.

• Rigidity and maintenance—Heavy cutting requires a rigid platform, and the GS 200 MSY is said to weigh 3,800 pounds more than another machine in the same class the company had considered. Additionally, its 4,944 pounds of X- and Z-axis thrust is more than twice as much as the competing model, the company says. Mr. Mitchell adds that the machine’s linear guides provide faster motion with less friction compared to the box ways on other brands.

He says that so far, the machine has required little maintenance. For example, the company appreciates the fact that the guideways and ballscrews are greased for life instead of lubricated with oil. This eliminates the need to deal with a lube separation system, coolant contamination or oil removal.

• Chip management—Mr. Brewster says the machine’s coolant options and 280-psi pressure are important for quickly flushing chips to the conveyor to keep the cutting area clean. “In a production environment, we need high coolant pressure for turning and drilling applications,” he explains. “We have the standard headwall flush, plus through-tool coolant to help remove chips from holes and grooves, to flood the cutting edge, and to cool down the cutting area.”

• Program prove-outs—The machine incorporates FANUC’s Manual Guide I programming, which provides a fully animated simulation of operations to help programmers prove out the process before machining begins. Craig Carpenter, manufacturing engineer at the Workholding Group, adds that programmers can also use M codes to control the torque limit for synchronous part transfer from the main spindle to the subspindle. This enables the subspindle chuck jaws to bottom out and locate against the face of a part held in the main spindle during transfer without damaging the machine.

Related Content

Machining Centers 15 Mar 2024

Ballbar Testing Benefits Low-Volume Manufacturing

Thanks to ballbar testing with a Renishaw QC20-W, the Autodesk Technology Centers now have more confidence in their machine tools.

Five-Axis 20 Sep 2023

6 Machine Shop Essentials to Stay Competitive

If you want to streamline production and be competitive in the industry, you will need far more than a standard three-axis CNC mill or two-axis CNC lathe and a few measuring tools.

Machining Centers 16 Aug 2024

4 Commonly Misapplied CNC Features

Misapplication of these important CNC features will result in wasted time, wasted or duplicated effort and/or wasted material.

Machining Centers 27 Nov 2024

How to Determine the Currently Active Work Offset Number

Determining the currently active work offset number is practical when the program zero point is changing between workpieces in a production run.

Automation

AMRs Are Moving Into Manufacturing: 4 Considerations for Implementation

AMRs can provide a flexible, easy-to-use automation platform so long as manufacturers choose a suitable task and prepare their facilities.

Basics

Machine Shop MBA

Making Chips and 高赔率六合彩 are teaming up for a new podcast series called Machine Shop MBA—designed to help manufacturers measure their success against the industry’s best. Through the lens of the Top Shops benchmarking program, the series explores the KPIs that set high-performing shops apart, from machine utilization and first-pass yield to employee engagement and revenue per employee.

高赔率六合彩

Manufacturer Turns Inward for New Machine